Get in touch
10/23/3035
How to Prepare Your Home Electrical System for an EV Charger
Electric vehicles (EVs) are no longer the future — they’re the present. Whether you drive a Tesla, Rivian, or Chevy Bolt, charging your car at home is the most convenient and cost-effective way to stay powered.
But before you schedule an installation, it’s important to make sure your home’s electrical system can safely handle the extra load. Installing a Level 2 charger (the most common residential choice) requires more than just an outlet — it often needs a dedicated circuit, permit approval, and sometimes a main panel upgrade.
Here’s what every Bay Area homeowner should know before adding an EV charger.
Step 1: Check Your Electrical Panel Capacity
Your electrical panel — also called your main service panel — is the control center for your home’s power. It distributes electricity to all your appliances, outlets, and lighting circuits.
Most modern EV chargers draw between 30 and 50 amps of continuous power. If your home has a 100-amp panel, that’s often not enough to safely support an additional circuit for a Level 2 charger.
Look inside your panel:
If it’s labeled 100A, you may need a 200A main panel upgrade.
If you see an older brand like Federal Pacific or Zinsco, it’s likely time for replacement regardless of charger installation.
At Ally Electric & Solar, our licensed electricians perform a load calculation to determine if your home’s system can handle the added demand.
Step 2: Choose the Right Charger Type
There are two primary residential charger types:
Charger LevelVoltageTypical Charging SpeedCircuit RequiredLevel 1 120V (standard outlet)3–5 miles of range per hourNone (uses standard plug)Level 2 240V (dedicated circuit)25–40 miles of range per hour40A–60A breaker
For daily convenience and faster charging, most homeowners opt for Level 2 chargers — such as the Tesla Wall Connector, ChargePoint Home Flex, or Emporia EV Charger.
These require professional installation and a dedicated 240V circuit, which must comply with California Electrical Code and PG&E interconnection standards.
Step 3: Verify Permitting and Utility Requirements
Installing an EV charger isn’t just about plugging in — it’s an electrical upgrade that requires city permitting and sometimes coordination with PG&E.
Your installer will handle the permit application, inspection scheduling, and PG&E notification (if applicable).
At Ally, we include these services in every installation — ensuring your system passes inspection and qualifies for rebates such as:
PG&E EV Charge Rebate
California Clean Vehicle Rebate (CVRP)
These incentives can help offset installation costs for qualified homeowners.
Step 4: Plan for Future Energy Upgrades
If you’re considering solar panels or a home battery system in the future, it’s smart to plan your EV charger installation with expansion in mind.
A properly sized 200-amp main service panel not only supports your EV charger but also prepares your home for:
Solar PV system integration
Battery backup (e.g., Tesla Powerwall, Enphase IQ Battery, FranklinWH)
Heat pump or induction appliances
By upgrading once, you avoid costly rework later — making your home fully “electrification-ready.”
Step 5: Schedule a Professional Inspection
Before installation, a licensed electrician should evaluate:
Your panel’s amperage rating and available breaker space
Wiring condition and grounding
Distance between the panel and the parking area
Site feasibility for conduit and charger placement
Ally Electric & Solar provides a home inspection to assess all of the above. Once your system is approved, we handle the installation, permitting, and setup — so you can start charging confidently.
Power Your Drive with Ally Electric & Solar
Installing an EV charger is one of the best upgrades you can make for convenience, sustainability, and long-term savings.
At Ally Electric & Solar, we specialize in EV charger installations, main panel upgrades, and solar + battery systems across the Bay Area. Our team handles every step — design, permitting, installation, and PG&E coordination — ensuring your home is safe, efficient, and ready for the road ahead.
Schedule Your Free EV Charger Consultation
Ally Electric & Solar, Inc.
California Licensed Electrical Contractor — License #806465
Serving the Greater San Francisco Bay Area
info@allyelectricandsolar.com
(510) 559-7990
www.allyelectricandsolar.com
Book your free EV charger inspection today and we’ll help you choose the right charger, verify your electrical capacity, and provide a no-obligation quote.
10/02/2025
PG&E NEM 3.0 and Solar Batteries: How California Homeowners Can Maximize Savings in 2025
If you live in Northern California, you’ve probably heard of PG&E’s NEM 3.0 program and the changes it brought to solar customers in 2023. Many homeowners are now asking the same question: Is solar still worth it in 2025?
The short answer is yes — but the way you design your system matters more than ever. Under NEM 3.0, solar plus a battery is the winning combination for lowering bills, improving energy independence, and protecting your home during outages.
In this guide, we’ll break down what changed, how it affects your PG&E bill, and why batteries like the Tesla Powerwall 3, Enphase IQ 10C, and FranklinWH aPower are becoming essential for California homeowners.
What Changed Under PG&E’s NEM 3.0?
Under the previous program (NEM 2.0), homeowners earned near-retail credit for each kilowatt-hour they exported back to the grid. That meant solar panels alone could dramatically cut electricity bills — even without a battery.
With NEM 3.0, the value of exported electricity has been reduced by roughly 75% on average. Instead of being credited at close to the retail rate, exported power is compensated at the “avoided cost” rate, which is based on wholesale electricity prices.
Daytime exports (midday) are worth much less.
Evening energy (4 p.m. – 9 p.m.) is expensive, and that’s when solar panels aren’t producing.
This shift makes it harder to save money with solar panels alone, because you’re sending energy to the grid when it’s cheap and buying energy back when it’s expensive.
Why Batteries Are the Key to Savings
The new rules change the math — but they also highlight the value of solar battery storage. A battery allows you to:
Store excess solar power during the day.
Use it in the evening when PG&E’s rates are highest.
Reduce exports at low daytime rates.
Cut peak demand charges.
In other words, batteries help you keep more of the energy you generate, shifting your savings from export value to self-consumption value.
Even better: batteries provide backup power during blackouts — something many Bay Area homeowners worry about, especially after recent wildfire seasons and earthquakes.
Incentives in 2025: ITC + SGIP
The cost of adding a battery has dropped significantly thanks to federal and state incentives.
Federal Tax Credit (ITC):
The 30% credit applies to solar and batteries through at least 2032.
Stand-alone batteries also qualify (even if you already have solar).
California SGIP (Self-Generation Incentive Program):
Rebates are still available in 2025, especially for homes in fire-threat or outage-prone areas.
Typical savings: $2,000–$5,000 per battery.
Together, these incentives can cut the upfront price of a battery system by 30–40%, making it a financially smart move under NEM 3.0.
Real-World Example: Bay Area Home
Let’s look at a simple case study.
System size: 7 kW solar + 10 kWh battery
Without battery: Home exports most power at midday when rates are low. Monthly bill reduction: ~40%.
With battery: Stored energy offsets evening rates (often $0.40–$0.50/kWh). Monthly bill reduction: ~65–70%.
Over a 10-year span, the homeowner saves thousands more by adding a battery. And during PG&E outages, the battery provides reliable backup for lights, refrigeration, internet, and even essential medical devices.
Choosing the Right Battery: Tesla, Enphase, or FranklinWH?
At Ally Electric & Solar, we install several top battery brands. Each has strengths depending on your home’s needs.
Tesla Powerwall 3
High capacity (~13.5 kWh per unit).
Built for whole-home backup.
Sleek design, widely recognized.
Enphase IQ Battery 10C
Modular — you can add units over time.
Works seamlessly with Enphase microinverters.
Good option for homes starting with a smaller system.
FranklinWH aPower + aGate
Strong load management features.
Robust warranty and growing popularity in California.
Flexible for both new installs and retrofits.
Which is best? It depends on your household usage, backup needs, and budget. Our team helps homeowners compare options with clear side-by-side analysis.
Beyond Savings: Energy Independence and Resilience
While much of the NEM 3.0 discussion is about dollars and cents, the bigger picture is energy independence.
Batteries make you less dependent on PG&E’s shifting rate structures.
You gain peace of mind during outages — whether from wildfires, storms, or earthquakes.
Electrification trends (EVs, heat pumps, induction stoves) mean households will rely even more on electricity. Pairing solar with storage ensures you’re ready for that future.
Final Thoughts
PG&E’s NEM 3.0 has changed the landscape, but it hasn’t made solar a bad investment. It’s simply shifted the smart strategy from solar alone to solar plus battery storage.
With the 30% federal tax credit and SGIP rebates still in place, 2025 is an excellent year to invest. By adding storage, you can:
Maximize bill savings.
Gain resilience during outages.
Future-proof your home for the electrification era.
Call to Action
At Ally Electric & Solar, we specialize in designing solar + battery systems tailored to California homes. Whether you’re considering the Tesla Powerwall 3, Enphase IQ 10C, or FranklinWH aPower, our team can help you choose the right solution for your budget and lifestyle.
Contact us today for a free consultation and see how much you can save under PG&E’s new rules.
9/30/2025
Heat Pumps and Solar PV + Energy Storage: Are They a Good Match?
In recent years, homeowners across California and beyond have been exploring how to cut energy costs and reduce carbon emissions. Two technologies often come up in the same conversation: heat pumps and solar photovoltaic (PV) systems with energy storage (ESS). But how do these solutions relate, and is combining them really the right move for every household?
What Are Heat Pumps?
A heat pump is an electric appliance that can both heat and cool a home by transferring heat rather than generating it directly.
Heating mode: extracts heat from the outside air (even in cold weather) and moves it indoors.
Cooling mode: works like an air conditioner, removing heat from indoors and releasing it outdoors.
Because they move heat instead of producing it, heat pumps can achieve efficiencies of 200%–400%, compared to around 90% efficiency for electric resistance heaters or gas furnaces.
How Much Electricity Do Heat Pumps Use?
Electricity consumption depends on:
System size (measured in tons or BTUs).
Climate zone (mild Bay Area vs. colder mountain regions).
Home insulation and ducting.
On average:
A typical residential heat pump uses 2,000 to 4,000 kWh per year for heating and cooling.
That translates to 15%–30% of a household’s total annual electricity use in California.
In colder climates, usage can be higher, especially if backup resistance heating is needed.
For comparison, the average California household consumes about 6,500–7,000 kWh annually (without electric vehicles or large electrification loads). Adding a heat pump can increase that number by 25%–50%, depending on usage.
Why Pair Heat Pumps With Solar + ESS?
Offset Higher Electricity Demand
Without solar, switching from gas heating to a heat pump can cause a noticeable jump in your electric bill.
A properly sized solar PV system can offset most or all of the added consumption.
Take Advantage of Efficiency
Heat pumps are already efficient compared to gas furnaces or electric resistance heating.
Running them on solar power makes heating and cooling nearly emissions-free.
Resiliency With Storage
Energy storage systems (like Tesla Powerwall or Enphase IQ Battery) allow homes to keep heating or cooling during outages.
In California, where blackouts and Public Safety Power Shutoffs (PSPS) are a concern, this adds peace of mind.
Peak Shaving
Many utilities have time-of-use (TOU) rates, with higher costs in the late afternoon/evening.
Pairing a heat pump with storage lets homeowners shift usage and avoid peak pricing.
Is It Always a Good Solution?
It depends on your situation:
Good fit if:
You live in a region with mild winters (like most of California).
You’re planning to replace aging HVAC equipment or gas furnaces.
You want to reduce reliance on fossil fuels and improve indoor comfort.
You already have or plan to install solar PV with sufficient capacity.
Potential challenges:
In very cold climates, heat pumps may need backup resistance heating, which increases energy use.
Upfront costs for both a heat pump and a solar + storage system can be significant.
System sizing is critical — undersized solar arrays may not cover the added load.
The Bottom Line
Heat pumps and solar PV + ESS are complementary technologies. Heat pumps make homes more energy-efficient and all-electric, while solar plus storage ensures that extra demand is met sustainably and resiliently. For many California homeowners, combining the two is a smart long-term strategy — but the right solution depends on climate, home size, and budget.
Before making the switch, it’s best to consult with both a licensed HVAC contractor and a solar professional who can model your home’s projected energy use and recommend the right system size.
9/24/2025
Earthquakes Remind Us: Why Solar + Battery Systems Are Essential for Bay Area Homes
Just a few days ago, the Bay Area was shaken by a 4.3-magnitude earthquake near Berkeley/Pinole. While this was a moderate event, it served as an important reminder that we live in an earthquake-prone region where power outages can occur at any time. As an electrical engineer working with residential energy systems, I see firsthand how families are left vulnerable when the grid fails — and why solar panels combined with energy storage systems (ESS) are no longer a luxury, but a necessity.
How Earthquakes Affect the Grid
During an earthquake, even a moderate one:
Utility infrastructure is vulnerable. Power lines, substations, and transformers can be damaged, leaving neighborhoods in the dark.
Gas pipelines pose safety risks. This makes electric cooking and heating a safer and more reliable option during emergencies.
Restoration can take days. Depending on the severity, PG&E crews may need hours — even weeks — to restore service to all customers.
For homeowners, that means no lights, no internet, no heating, and no way to safely store food unless they have a backup system.
Why Energy Storage Systems (ESS) Matter
When paired with solar panels, battery storage systems like the Tesla Powerwall 3, Enphase IQ, or FranklinWH aPower give families independence from the grid.
From an engineering perspective, here’s what these systems can provide after an earthquake:
2+ Weeks of Critical Power: A well-sized battery can keep essential loads running — refrigeration, lighting, phone charging, internet routers, and medical equipment — for up to two weeks when managed carefully.
Safe Cooking & Heating: Electric induction cooktops, microwaves, or small space heaters can run off stored solar power, eliminating reliance on gas.
Automatic Isolation from the Grid: Modern ESS units include rapid shutoff and islanding capability, which means when the grid goes down, your home seamlessly switches to backup power.
Recharge Daily with Solar: Unlike a gas generator that needs constant refueling, a solar + battery system recharges every morning — ensuring sustainability for as long as the grid is down.
Real-World Resilience for Bay Area Families
Living in the Bay Area means preparing for the unexpected. With earthquakes, wildfires, and storms becoming more common, resilience isn’t optional — it’s essential.
Families who invest in solar + battery systems are not just saving on monthly utility bills; they are also investing in:
Peace of mind during natural disasters
Energy independence from PG&E’s outages and rate hikes
A cleaner, safer alternative to gas generators
Final Thoughts
The Berkeley/Pinole earthquake is a reminder that the grid is fragile, but your home doesn’t have to be. With solar panels and a properly designed energy storage system, you can keep life moving — cooking meals, heating your home, and staying connected — even when the lights go out across the city.
At Ally Electric and Solar, we specialize in designing and installing solar + battery systems that protect families during outages. If you’d like to learn how to make your home more resilient against earthquakes and other emergencies, contact us today for a free consultation.
9/18/25
How Does the NEM 3.0 Application Work?
When you apply for solar or add a battery in PG&E’s territory, your contractor (like Ally Electric and Solar Inc.) files an Interconnection Application. This is how it works:
Submit Interconnection Application
System details (panels, inverters, batteries) are entered into PG&E’s portal.
Required documents: site plan, single-line diagram, spec sheets.
PG&E Review
PG&E checks that your system complies with Rule 21 interconnection standards.
They confirm system size, safety ratings, and that your main panel can handle the system.
Permission to Operate (PTO)
Once approved and inspected, PG&E issues PTO.
This is the official green light for you to run your solar + storage system and start receiving NEM 3.0 credits.
What Does This Mean for Homeowners?
Under NEM 3.0:
Payback is longer without storage → Solar alone saves less because export credits are lower.
Solar + Battery is the new standard → A battery allows you to store daytime power and use it at night, making your system pay off faster.
Energy Security → Batteries provide backup power during PG&E outages.
How Ally Electric and Solar Inc. Can Help
At Ally Electric and Solar Inc. (Richmond, CA – CSLB #806465), we’ve guided hundreds of Bay Area families through the PG&E application process. We handle:
Preparing and submitting your NEM 3.0 interconnection application.
Designing systems that maximize self-consumption under new rules.
Installing trusted batteries like Tesla Powerwall, Enphase IQ, FranklinWH.
Panel upgrades and permitting for seamless integration.
Take Action Now
The sooner you apply, the sooner you can lock in savings and protect your home from rising PG&E rates.
Contact us today to get started with your NEM 3.0 solar + storage consultation.
510-559-7700
info@allyelectricandsolar.com
www.allyelectricandsolar.com
CSLB License #806465
FQAs
1. If I sell excess energy to PG&E, will PG&E charge me for it?
No — PG&E does not charge you for exporting your excess solar energy. Instead, under NEM 3.0, they give you export credits on your bill. The difference is that these credits are now much lower (around 5–8¢ per kWh) compared to the near-retail credits homeowners received under NEM 2.0. That’s why using your own solar energy or storing it in a battery provides greater savings than sending it back to the grid.
2. Will I still get the 30% Federal Solar Tax Credit under NEM 3.0?
Yes. The 30% Federal Investment Tax Credit (ITC) is completely separate from NEM policies. It applies to both solar and battery systems installed through the end of 2025.
3. Is it still worth going solar under NEM 3.0?
Yes — but the strategy has changed. Solar alone saves less than it used to because export credits are lower. Pairing solar with a battery system allows you to store your extra energy and use it during expensive peak hours, which dramatically improves your savings.
4. Can I keep my old NEM 2.0 plan if I already have solar?
Yes. If your system was approved under NEM 2.0, you are grandfathered into that program for 20 years from your Permission to Operate (PTO) date. However, adding new solar capacity may trigger a new NEM 3.0 review. Adding only a battery (without increasing solar size) usually does not change your NEM 2.0 status.
5. How long does the NEM 3.0 application take?
After submitting your application and documents, PG&E typically takes 2–4 weeks to review. Once the city inspection is complete and passes, PG&E issues your Permission to Operate (PTO).
6. Can I charge my battery from the grid under NEM 3.0?
Yes, depending on the configuration. Systems like Tesla Powerwall and Enphase IQ Battery can be set to allow or prevent grid charging. Most homeowners in PG&E territory choose “solar-only charging” to comply with NEM requirements and maximize savings.
7. What happens if I use more electricity than my solar produces?
You’ll still receive energy from PG&E, and you’ll be billed at normal rates for that extra usage. Your solar + battery system helps reduce this by covering as much of your home’s load as possible.
Shaping California's Energy Future: Ally Electric and Solar's Perspective on the Utility Bill Debate
As a trusted leader in solar energy solutions with over 14 years of experience serving California residents, Ally Electric and Solar is at the forefront of transforming the state's energy landscape. The recent decision by the California Public Utilities Commission to implement a monthly utility bill fee has ignited a statewide conversation about the affordability and sustainability of energy consumption. At Ally Electric and Solar, we are committed to providing innovative and cost-effective solar solutions that empower residents to take control of their energy future.
The introduction of a fixed monthly fee, alongside reduced kilowatt-hour charges, has raised questions about the fairness and impact of such measures on California households. With our extensive expertise in solar energy systems, we understand the concerns of residents, particularly those in small households and low-income communities, who may be affected by the additional charges imposed by traditional utility providers. We believe that solar power offers a viable alternative that not only reduces energy costs but also contributes to a cleaner and more sustainable environment.
As a longstanding member of the California solar community, Ally Electric and Solar is dedicated to supporting residents in their transition towards renewable energy solutions. Our team of experts specializes in designing customized solar energy systems tailored to the specific needs of each customer, ensuring a seamless and efficient transition to solar power. With our unwavering commitment to quality service and customer satisfaction, we have earned a reputation as a trusted partner in delivering reliable and sustainable energy solutions.
As the debate over energy pricing continues to unfold, Ally Electric and Solar remains steadfast in our mission to empower Californians with accessible, affordable, and environmentally friendly energy options. By harnessing the power of the sun, we believe that together, we can shape a brighter and more sustainable future for generations to come. Join us in our journey to revolutionize California's energy landscape and embrace a future powered by Ally Electric and Solar.
To learn more about our comprehensive solar energy solutions and how we can help you navigate the changing energy pricing structure in California, visit our website at www.allyelectricandsolar.com. Together, let's pave the way for a greener, more sustainable tomorrow.
Powering Your Journey: A Guide to Residential EV Charger Installation with Ally Electric and Solar
Hey there, fellow Bay Area residents! Are you ready to join the electric vehicle (EV) revolution? At Ally Electric and Solar, we're here to guide you through the ins and outs of installing an EV charger right in the comfort of your own home. Let's dive into what you need to know to make the switch to sustainable transportation a breeze.
1. Checking Your Home's Electrical Capacity: Before we get started, it's essential to make sure your home's electrical system can handle the addition of an EV charger. Our team of expert electricians will assess your electrical panel's capacity and recommend any necessary upgrades to ensure safe and reliable charging for your EV.
2. Choosing the Perfect Charger: With so many options on the market, it can be overwhelming to choose the right EV charger for your needs. Fear not! We'll walk you through the selection process, helping you choose a Level 2 charger that offers fast charging speeds and convenient features like scheduling and remote monitoring.
3. Finding the Ideal Location: Convenience is key when it comes to EV charging. Our team will work with you to find the perfect spot for your new charger, whether it's in your garage, carport, or driveway. We'll make sure the installation is neat, tidy, and easily accessible for hassle-free charging every time.
4. Navigating Permits and Regulations: Dealing with permits and regulations can be a headache, but don't worry – we've got you covered. Our knowledgeable team is well-versed in local permitting requirements and will handle all the paperwork to ensure your EV charger installation is compliant with Bay Area regulations.
5. Planning for the Future: Thinking about upgrading to a different EV down the line? We'll help you future-proof your charging setup by choosing a charger with scalability features, so you'll be ready for whatever the road ahead brings.
6. Budget-Friendly Solutions: We understand that cost is a consideration for everyone. That's why we offer competitive pricing on EV charger installations and can help you explore potential incentives and rebates to offset the initial investment.
7. Safety First: Your safety is our top priority. We'll install your EV charger according to the highest safety standards, including NEC requirements and manufacturer specifications, to ensure worry-free charging for you and your family.
With Ally Electric and Solar by your side, installing an EV charger at home is a breeze. Say goodbye to gas stations and hello to convenient, eco-friendly charging right in your own garage. Ready to make the switch to electric? Get in touch with us today, and let's power your journey together! Call us at 510-559-7700 or email us at nsaglam@allyelectricandsolar.com
Exploring Aggregate Metering: NEMV vs. NEMA
Let's dive into the world of aggregate metering and unravel the intriguing differences between NEMV and NEMA. In California's energy landscape, where sustainability is a driving force, understanding these concepts can empower customers to make informed decisions about their energy usage.
Net Energy Metering (NEM) serves as the foundation of renewable energy incentives, allowing customers to offset their energy consumption by feeding excess power back into the grid. But when it comes to customers with multiple meters or properties, things get interesting with Virtual Net Energy Metering (NEMV) and Aggregate Net Energy Metering (NEMA).
NEMA is like the conductor orchestrating a symphony of energy across multiple meters. It enables a customer with several meters on the same or adjacent properties to combine their renewable energy generation, effectively offsetting the collective load behind all eligible meters. It's like having one big energy party where everyone contributes to the groove.
Now, picture NEMV as the solo artist stealing the spotlight on the energy stage. This option caters to customers with multiple meters on a single property, allowing them to aggregate their renewable energy output and offset the combined load behind all meters. But here's the twist: the meter measuring renewable energy output stands alone, without any additional load behind it, solely focused on tracking renewable energy production. It's like having a dedicated spotlight on your renewable energy efforts, shining bright for all to see.
One of the coolest features of NEMV is the power allocation control it offers. It's like having the DJ's control deck in your hands, allowing you to decide how much power is allocated to each aggregate account. Whether you're prioritizing predicted loads or considering cost implications, NEMV gives you the flexibility to fine-tune your energy distribution strategy. It's all about empowering customers to tailor their energy usage based on their unique needs and priorities.
On the flip side, NEMA operates more like a pre-set playlist, where the utility company determines the percentage of usage allocation. While it simplifies the process, it may limit the flexibility to optimize energy allocation based on individual preferences.
One of the coolest features of NEMV is the power allocation control it offers. It's like having the DJ's control deck in your hands, allowing you to decide how much power is allocated to each aggregate account. Whether you're prioritizing predicted loads or considering cost implications, NEMV gives you the flexibility to fine-tune your energy distribution strategy. It's all about empowering customers to tailor their energy usage based on their unique needs and priorities. And here's the kicker: NEMV also allows customers to sell back excess energy to the grid, but at the wholesale rate. While it won't make you rich overnight, every little bit counts, right?
In a nutshell, understanding the nuances between NEMV and NEMA is like mastering the dance between freedom and structure in the energy world. It's about finding the right balance between control, convenience, and incentives to make the most of your renewable energy journey. So, whether you're rocking out with NEMV or grooving with NEMA, remember that the power is in your hands to shape a more sustainable future.
For more information about the NEMA click here. https://www.pge.com/assets/pge/docs/account/billing-and-assistance/nema-billing-guide.pdf